|
Product Details:
Payment & Shipping Terms:
|
| Design: | Double Offset | Material: | WCB, CF8, CF8M |
|---|---|---|---|
| Disc: | CF8/CF8M | Shaft: | 17-4PH, XM-19 |
| Seat: | RPTFE, Viton | Port Size: | 16"~144" |
| Pressure: | 150Lb, 300lb, 600Lb, 900Lb | Temperature Of Media: | High Temperature |
| High Light: | high temperature butterfly valve,lug type butterfly valve |
||
36 Inch Large Size Monel Disc Motorized High Performance Butterfly Valves Flanged Type
What is Butterfly Valve
A butterfly valve is a type of quarter turn valve used to regulate or stop the flow of liquids through a pipe. A quarter turn valve means that whenever the Operator is turned 90 degrees, the valve is either fully open or fully closed. A metal disc within the body of the valve is positioned perpendicular to the flow in a fully closed position.
A user then regulates the flow by intermediate rotations of the operator. Butterfly valves apply to a wide range of uses. They are used in all applications that can tolerate a disc in the flow stream. The TEKO butterfly valve can be operated by handles, gears or actuators, depending on the specific need. The valve is advantageous because of its small size that doesn’t take up much space, easier to turn, lightweight and lower cost compared to other valve designs.
What are High-Performance Butterfly Valves?
Double offset butterfly valve is an HPBFV rated for ANSI (285 @ 100F or 100 psig @ 400F for 150# ANSI) rated applications. For this type of valve, the disc and stem are double offset, (set back behind the disc and to the side) causing the disc to rotate into place upon closure without significant seat contact. Different from an RSBFV, the stem is located behind the disc, which enables the disc to “rub” over the seat in the last 10% of travel, during the 90-degree rotation.
This seat usually is some type of Reinforced PTFE or for high temperatures above 450F, the seat can be metal, usually a hardened metal, like Stellite. The most user-friendly allow removal/replacement of the stem, disc, and seat without welding
Where to use the High-performance Butterfly Valves?
These valves are used for higher pressure than zero offset butterfly valves (ANSI Rated), and offer adjustable packing on the stem thus lower emissions and stem leakage.
Specifications
| Body Style | Wafer, Lug, Double Flanged |
| Body | CS, SS |
| Disc | CF8M, CF8 |
| Stem | 316 SS, 17-4 PH, XM-19 |
| Seat |
PTFE, RTFE Metal (SS, Inconel) Firesafe |
| Size Range | 2”~48” |
| Pressure Rating |
Class 150 Class 300 Class 600 |
| Leakage Class |
Soft seat – Class VI Metal seat – Class IV |
| Design Standard | API 609 Category B, BS EN 593 |
| Testing Standard | API 598, BS EN 12266-1 |
Contact Person: sales
Tel: +8613660157288
Bubble Tight Low Pressure Air Operated Slurry Pinch Valve
Epoxy Coating Body Packing Gear Slurry Pinch Valve For Water Plant Less Zero Leakage Bevel
Pneumatic Actuated Handmade Sleeve Fabric Cord Enhanced Pinch Valve For Mining Pelletizing
Heavy Duty Pneumatic Hose Valves Cast Iron Body Flange End Full Bore
Gear Operation Flow Regulating Industrial Valves Ductile Iron Body Piston Type TEKO Brand
Tilted Disc Industrial Check Valve Minimum Pressure Loss With Oil Dashpot For Water
Double Seated Industrial Valves With High Abrasion Natural Rubber Short Body
Top Entry Double Seated Industrial WCB Ball Valve Cone Shape With No Clogging
F7353 JIS Marine Valve Cast Iron Screw Down Non - Return Straight Type With CCS Certificate
Flanged End Marine Bronze Globe Valve For Water Purifier JIS F7409
